Vertex VX-351 or VX-354 Cloning Requires a CT-27A Radio-to-Radio Cable Adding a new Vertex Standard or radios to your existing fleet is a simple process with the built-in cloning feature. Browning auto 5 20 gauge serial numbers. All you need is a Vertex cloning cable to transfer the programming information. A VX-351 will not clone to a VX-354 and all models must be identical using the same VHF or UHF band.

VX-350 Series Cloning is a 6 Step Procedure • Turn both radios OFF • Connect the CT-27 cloning cable between the MIC/SP jacks of the two radios. • Press and hold the “Side 1” key and the “PTT” key while turning the radio ON. The LED will remain off and if a VX-354, it will display “ CLONE”. • Repeat step 3 on the other radio. • To switch the radio to receive data, press the “Side 1” key.

Then the LED indicator will glow “ Green“. • To switch the radio to transmit data, press the “PTT” key.

Vertex Standard VX 350 VX 351 VX 354 Radio Programming Software CE86 0 results. You may also like.

Then the LED indicator will glow “ Red“. When the data transfer is successful, the VX-354 display will return to “CLONE” or if a VX-351, the TX/BUSY indicator will turn off. You are now ready for the next radio or turn both radios off and disconnect the CT-27 cable. You can then power on the radios and begin normal operation.

• It must be used ONLY for (1) there is a 4 cm distance from the body during transmitting, (2) monitoring purposes, using the speaker only and (3) for carrying purposes. Always use Vertex Standard authorized accessories. WARNING: This radio generates RF electromagnetic energy The information listed above provides the user with the information during transmit mode. • Press (or Press and hold) the assigned Programmable key momen- keys. These Programmable keys functions can be customized (set tarily to disable the Tone squelch. To other functions), via programming by your VERTEX STANDARD dealer, to meet your communications/network requirements. Some fea- Lamp.